Audio over IP - DSP
DD4
#82MEG425
DANTE interface. 4 inputs / 4 outputs. PoE or external power supply.
DD4 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.
DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.
It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.
Main information
- Euroblock 3.5 mm connectors for analogue signal.
- Configurable with DANTE Controller.
- External power supply or PoE.
Product main measures (m)
0.13 x
0.11 x
0.04
| Input Channels | 4 balanceados/ 4 balanced |
| Output channels | 4 servo-balanceados/ 4 servo-balanced |
| Input Sensitivity | 22 dBu |
| Maximum output level | 22 dBu |
| THD+N | < 0.01% |
| S/N ratio | > 100 dB |
| Crosstalk | < -80 dB (20 kHz) |
| Sampling frecuency | 44.1 / 48 / 88.2 / 96 KHz *DD4(96 KHz en modo 2x2, 48 KHz en modo 4x4)/ 44.1 / 48 / 88.2 / 96 KHz *DD4(96 KHz in 2x2 mode, 48 KHz in 4x4 mode) |
| Bit Depth | 16, 24 y 32 bit |
| Frequency Response | 20 Hz - 20 KHz |
| Latency | 1 ms (estándar)/ 1 ms (standard) |
| Connections | Ethernet: 100BASE-TX & PoE; Audio: 8 x Euroblock 3 pin |
| Material | Aluminium housing |
| Power supply | External supply: 24 Vdc; PoE: PoE Class 0 802.3af. |
| Consumption | 2.4 W |
| Dimensions | 40.45 x 109 x 133.75 mm |
| Weight | 355 g |
| Length(m) | Width(m) | Height(m) | Weight(kg) | |
|---|---|---|---|---|
| Product | 0.13 | 0.11 | 0.04 | 0.36 |
Enhance your order
You might also be interested in these products
